Roofing, Gutters & More in Sterling
We don't do a little of everything. We do roofing. That specialization is why we can offer manufacturer certifications and the best warranties available to Sterling homeowners.
Roof Replacement
Full roof replacement starts with a complete tear-off down to the deck. We inspect every board for rot or soft spots. In Sterling, we find decking damage on about 30% of tear-offs. Damaged sections get replaced with CDX plywood before anything else goes on. Then we build up: ice and water shield in valleys and at eaves, synthetic underlayment across the full deck, new drip edge on every edge, starter strip, field shingles, hip and ridge caps, and ridge vent. Dumpster, permits, and cleanup included.
Get a Free Quote →Roof Repair
Improper step flashing is the leading cause of roof leaks at wall-to-roof transitions. Step flashing needs to be woven between shingle courses with each piece extending 4" above the shingle exposure. We see Sterling homes where the last roofer used continuous L-flashing or just caulked the gap. That always fails. We tear it out and install proper step flashing with a kick-out diverter at the bottom per IRC R905.2.8.3.
Get a Free Quote →Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →New Roof Installation
Building a custom home in Sterling? We work directly with you and your architect on material selection, color coordination, and budget planning. From designer shingles to standing seam metal, we install it all and back it with manufacturer plus workmanship warranties.
Get a Free Quote →Metal Roofing
Metal roofing reflects solar heat instead of absorbing it. In Kansas, that means 15-25% lower cooling costs compared to dark asphalt shingles. The higher upfront cost pays for itself over the life of the roof. And the life of a metal roof is twice or three times longer than shingles.
Get a Free Quote →Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in Kansas's weather.
Get a Free Quote →Flat Roofing
The number one cause of flat roof failure is ponding water. Standing water that doesn't drain within 48 hours after rain. We solve ponding by installing tapered insulation systems that create positive slope to drains, scuppers, or roof edges. Minimum 1/4" per foot of slope eliminates standing water.
Get a Free Quote →Commercial Roofing
Your commercial roof has HVAC units, exhaust fans, plumbing vents, and satellite dishes punching through it. Every penetration is a potential leak point. We install prefabricated curbs, custom-welded flashings, and pitch pans that handle foot traffic and thermal cycling without failing.
Get a Free Quote →Gutter Installation
We hang gutters with hidden hangers screwed into the rafter tails or fascia board every 24 inches max. No spike-and-ferrule, no exposed hardware. Proper pitch is 1/4" per 10 feet toward each downspout. Too flat and water sits. Too steep and it looks wrong.
Get a Free Quote →Roof Inspection
After a storm, our inspection documents hail hits, wind damage, lifted shingles, and cracked components for your insurance claim. We take measurements, count damage per test square, and prepare a report your adjuster can use. Free for Sterling homeowners. We only charge if you hire us for the repair.
Get a Free Quote →Emergency Roof Repair
We don't charge extra for emergency tarp jobs. The tarping cost is rolled into the permanent repair price. If you need us at midnight during a storm, the price is the same as a Tuesday afternoon.
Get a Free Quote →Skylight Installation
Skylight replacement on existing curbs: VELUX FCM curb-mount units install directly on the existing curb frame. No structural modification, no interior disruption. The FCM sits on the curb with a built-in sill pan and integrates with a new QCM flashing kit. Low-E4 laminated glass with argon fill provides R-value improvements over older skylights. Solar-powered blinds and venting available on VSS models. The 10-year No Leak Installation Warranty requires VELUX-certified installation with the complete flashing system. We're certified in Sterling.
Get a Free Quote →